2sa2210 no. a0667-1/5 applications ? relay drivers, lamp drivers, motor drivers. features ? adoption of mbit processes ? large current capacitance ? low collector-to-emitter saturation voltage ? high-speed switching speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo --50 v collector-to-emitter voltage v ceo --50 v emitter-to-base voltage v ebo -- 6 v collector current i c --20 a collector current (pulse) i cp --25 a base current i b -- 3 a collector dissipation p c 2w tc=25 c30w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7529-002 ordering number : ena0667a 21512 tkim tc-00002708/30707fa ti im tc-00000565 sanyo semiconductors data sheet 2sa2210 pnp epitaxial planar silicon transistor high-current switching applications http:// semicon.sanyo.com/en/network product & package information ? package : to-220f-3sg ? jeita, jedec : sc-67 ? minimum packing quantity : 50 pcs./magazine marking electrical connection 1 : base 2 : collector 3 : emitter sanyo : to-220f-3sg 10.16 0.8 15.87 12.98 3.3 6.68 3.23 1.47 max 15.8 4.7 2.54 2.76 123 0.5 2.54 2.54 3.18 ( 1.0) (0.84) detail-a a emc frame a2210 lot no. 2 1 3
2sa2210 no. a0667-2/5 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb = --40v, i e =0a --10 a emitter cutoff current i ebo v eb = --4v, i c =0a --10 a dc current gain h fe v ce = --2v, i c = --1a 150 450 gain-bandwidth product f t v ce = --10v, i c = --1a 140 mhz output capacitance cob v cb = --10v, f=1mhz 215 pf collector-to-emitter saturation voltage v ce (sat) i c = --7a, i b = --350ma --200 --500 mv base-to-emitter saturation voltage v be (sat) i c = --7a, i b = --350ma --1.2 v collector-to-base breakdown voltage v (br)cbo i c = --100 a, i e =0a --50 v collector-to-emitter breakdown voltage v (br)ceo i c = --1ma, r be = --50 v emitter-to-base breakdown voltage v (br)ebo i e = --100 a, i c =0a --6 v turn-on time t on see speci ed test circuit 60 ns storage time t stg see speci ed test circuit 270 ns fall time t f see speci ed test circuit 20 ns switching time test circuit v r r l v cc = --20v v be =5v i c =20i b1 = --20i b2 = --7a + + 50 input output r b 100 f 470 f pw=20 s i b1 i b2 d.c. 1% i c -- v ce collector-to-emitter voltage, v ce -- v collector-to-emitter voltage, v ce -- v collector current, i c -- a i c -- v ce collector current, i c -- a it12019 0 --2.0 --0.5 --1.0 --1.5 0 -- 2 --14 --12 --10 -- 8 -- 6 -- 4 --16 --18 --20 it12020 0 --1.0 --0.8 --0.2 --0.4 --0.6 0 -- 1 -- 7 -- 6 -- 5 -- 4 -- 3 -- 2 -- 8 -- 9 --10 i b =0ma i b =0ma -- 700 m a -- 400 m a -- 500 m a -- 600 m a -- 300 m a -- 200 m a -- 100 m a -- 800 m a -- 900 m a -- 500 m a -- 400 m a -- 300 m a -- 200 m a -- 120 m a -- 140 m a -- 160 m a -- 180 m a -- 80 m a -- 100 m a -- 60 m a -- 40 m a -- 1000 m a -- 20 m a
2sa2210 no. a0667-3/5 cob -- v cb v be (sat) -- i c v ce (sat) -- i c f t -- i c v ce (sat) -- i c h fe -- i c i c -- v be h fe -- i c collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a dc current gain, h fe collector current, i c -- a dc current gain, h fe collector current, i c -- a gain-bandwidth product, f t -- mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v --0.1 --1.0 23 57 2 --10 357 2357 5 7 100 5 3 7 2 2 1000 --0.1 --0.01 7 5 3 27 5 3 27 55 3 2 --1.0 --10 3 2 it12026 --1.0 2 3 5 7 2 3 it12028 --0.1 --0.01 7 5 3 27 5 3 2 --1.0 7 5 3 22 --10 3 --0.1 --1.0 5 --0.01 2 3 5 7 7 2 3 5 7 ta=75 c 25 c --25 c ta= --25 c 25 c 75 c i c / i b =20 i c / i b =20 ta= --25 c 25 c 75 c it12024 --0.01 --0.1 23 57 2 --1.0 357 235 -- 1 0 7 5 3 10 2 7 100 5 3 2 7 1000 v ce = --10v it12027 --0.1 --0.01 7 5 3 27 5 3 2 --1.0 7 5 3 22 --10 3 --0.1 --1.0 --0.01 2 3 5 7 2 3 2 5 3 5 7 ta=75 c 25 c --25 c i c / i b =50 it12022 2 3 5 7 2 100 1000 10 3 5 7 --0.01 3 25 --0.1 7235 --1.0 --10 72 2 35 5 3 7 ta=75 c 25 c --25 c v ce = --2v --30 --25 --20 -- 5 --15 --10 0 0 it12021 --0.2 --0.4 --0.6 --0.8 --1.0 --1.4 --1.2 v ce = --2v 25 c --25 c ta=75 c it12023 it12025 2 100 10 3 5 7 2 1000 3 5 7 --0.01 3 25 --0.1 73 257 3 257 --1.0 --10 23 5 ta=25 c v ce = --2.0 v --0.7 v --0.5 v --0.2 v --1.0 v f=1mhz ta= --25 c 25 c 75 c
2sa2210 no. a0667-4/5 it12030 it12029 it12031 2.5 0.5 0 20 0 1.0 1.5 2.0 40 60 80 100 120 140 16 0 35 25 30 5 0 160 20 0 40 60 80 10 15 20 100 120 140 --0.01 2 3 5 7 2 --0.1 3 5 7 2 --1.0 --0.1 23 57 23 57 --1.0 23 57 --10 i cp = --25a dc operation s / b limit 1ms 10ms p t =500 s i c = --20a 100ms 3 5 7 2 --10 3 5 p c -- ta collector dissipation, p c -- w ambient temperature, ta -- c collector current, i c -- a collector-to-emitter voltage, v ce -- v p c -- tc collector dissipation, p c -- w case temperature, tc -- c tc=25 c single pulse forward bias a s o
2sa2210 no. a0667-5/5 ps this catalog provides information as of february, 2012. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
|
